EHM The Blue Line

xECK29x wrote: Sun Mar 14, 2021 1:42 pm Running into a weird issue where I'm trying to mass-update Pass Tendency, it looks like this value may be getting ignored on import. I will provide a sheet via email.

I'll take a look this weekend.

boscolam444 wrote: Sun Mar 14, 2021 1:09 am Hello,Why I can't click on the Wizard button at the rules and structure???

Let me check. I'll let you know.

Not how this could be implemented but might be a bit fun for creating some fantasy players, but if we were to select a nation when creating a new staff, would be fun to have a "Randomize Name" button that pulled from the list of names under nation. Totally not needed though.

boscolam444 wrote: Sun Mar 14, 2021 1:09 am Hello,Why I can't click on the Wizard button at the rules and structure???

I just checked. It's because I haven't yet finished writing the function. It's incredibly complex and involves some hefty re-designing.

xECK29x wrote: Sun Mar 14, 2021 1:42 pm Running into a weird issue where I'm trying to mass-update Pass Tendency, it looks like this value may be getting ignored on import. I will provide a sheet via email.

It works for me. I suspect you have the "Calculate Pass Tendency" setting on the Import screen enabled (see under the "Players" section of the Import screen). This auto-sets the Pass Tendency for each person edited via spreadsheets, so it'll be overwriting whatever you put in your spreadsheet.

xECK29x wrote: Sat Feb 13, 2021 10:46 pm Hey Archi,

Can you swap Auto-Set Pass tendency and Strength? I've built up quite the muscle memory to click Auto-Set Strength as the top one in that list .

Sorry I totally overlooked this for v0.5.1. Are you happy for me to swap these over for 0.5.2? I thought I'd check because I appreciate you might have gotten use to it being the other way round already!

archibalduk wrote: Sun Mar 21, 2021 3:42 pm It works for me. I suspect you have the "Calculate Pass Tendency" setting on the Import screen enabled (see under the "Players" section of the Import screen). This auto-sets the Pass Tendency for each person edited via spreadsheets, so it'll be overwriting whatever you put in your spreadsheet.

A ha that is it!

archibalduk wrote: Sun Mar 21, 2021 3:44 pm Sorry I totally overlooked this for v0.5.1. Are you happy for me to swap these over for 0.5.2? I thought I'd check because I appreciate you might have gotten use to it being the other way round already!

lol yea I got used to it

I'll leave it in that case!

TBIF wrote: Thu Feb 18, 2021 8:07 pm Something that I would use personally that I think would be easy to implement is a copy and paste on the player attribute page. I do a lot of my player profiles through the editor rather than Excel and this would let me tackle a swarm of similar players at the same time just making minor adjustments here and there.

TBIF wrote: Fri Mar 19, 2021 7:42 pm Not how this could be implemented but might be a bit fun for creating some fantasy players, but if we were to select a nation when creating a new staff, would be fun to have a "Randomize Name" button that pulled from the list of names under nation. Totally not needed though.

I'm still working through various posts in this thread, but the above two are done for version 0.5.2.

Hey all, I have downloaded latest rosters and when I want to use editor, it is all blank now, cant edit anything.

https://imgur.com/26pceVq

bogii23 wrote: Tue Mar 23, 2021 8:00 pm Hey all, I have downloaded latest rosters and when I want to use editor, it is all blank now, cant edit anything.

https://imgur.com/26pceVq

Looks like you are using the editor on a save game. I wouldn't edit a sav file as it's not fully supported. If you want to open it to see the structure, you need to Save As uncompressed.

That said, I'd find where the database file is of the db you want to edit. If you downloaded via steam, you need to look in the steamapps/eastside hockey manager folder, workshops. If you downloaded files from this site, you will want to copy them to your steam/ehm/data/database/database name folder. Important part, make a copy of it. Save it to a new folder and name it whatever you want to call your project. Then open that database file in the editor.

Small request, can you add filters to ignore  “A” and  “C” in club names during import of career history data? Just removes one step from the process

Sorry I don't think I follow. Could you give an example?

Not positive but I'm assuming if you copy/paste from elite:

2017-18 Tampa Bay Lightning “A” NHL 80 4 14 18 18 29 | Playoffs 17 1 4 5 8 -3
2018-19 Tampa Bay Lightning “A” NHL 47 2 15 17 8 12 |
2019-20 Florida Panthers NHL 69 5 14 19 14 -6 | Playoffs 4 0 0 0 2 -5
2020-21 Florida Panthers NHL 29 3 6 9 6 -4 |

TBIF wrote: Fri Mar 26, 2021 8:10 pm Not positive but I'm assuming if you copy/paste from elite:

2017-18 Tampa Bay Lightning “A” NHL 80 4 14 18 18 29 | Playoffs 17 1 4 5 8 -3
2018-19 Tampa Bay Lightning “A” NHL 47 2 15 17 8 12 |
2019-20 Florida Panthers NHL 69 5 14 19 14 -6 | Playoffs 4 0 0 0 2 -5
2020-21 Florida Panthers NHL 29 3 6 9 6 -4 |

Yup that is what I mean: https://www.eliteprospects.com/player/3656/eric-staal

Ah I see, thanks. I'll add that to the next release.

Looks like you are using the editor on a save game. I wouldn't edit a sav file as it's not fully supported. If you want to open it to see the structure, you need to Save As uncompressed.

That said, I'd find where the database file is of the db you want to edit. If you downloaded via steam, you need to look in the steamapps/eastside hockey manager folder, workshops. If you downloaded files from this site, you will want to copy them to your steam/ehm/data/database/database name folder. Important part, make a copy of it. Save it to a new folder and name it whatever you want to call your project. Then open that database file in the editor.

I downloaded the game via steam. How do I save as uncompressed?

xECK29x wrote: Fri Mar 26, 2021 2:32 pm Small request, can you add filters to ignore “A” and “C” in club names during import of career history data? Just removes one step from the process

Are you importing using csv or xlsx? Xlsx is more doable as all speech marks are stripped from csv files when importing (so Anaheim Ducks "C" is actually processed as Anaheim Ducks C).

If you're using csv files then it'll have to be a bit hacky in that we'll just check to see if the club name ends in "<space>a" or "<space>c" (e.g. "Anaheim Ducks C"). Will this cause any potential conflicts with club names? E.g. if you had Altona Maroons Bantam "A" then it would try Altona Maroons Bantam if it couldn't find Altona Maroons Bantam A.

EDIT: I've added the above fall-back function in the event csv is imported. You'll just need to bear in mind the possibility of "Altona Maroons Bantam A" potentially being imported as "Altona Maroons Bantam" if "Altona Maroons Bantam A" does not exist, but this does seem like a very small chance.

bogii23 wrote: Sat Mar 27, 2021 7:55 am

Looks like you are using the editor on a save game. I wouldn't edit a sav file as it's not fully supported. If you want to open it to see the structure, you need to Save As uncompressed.

That said, I'd find where the database file is of the db you want to edit. If you downloaded via steam, you need to look in the steamapps/eastside hockey manager folder, workshops. If you downloaded files from this site, you will want to copy them to your steam/ehm/data/database/database name folder. Important part, make a copy of it. Save it to a new folder and name it whatever you want to call your project. Then open that database file in the editor.

I downloaded the game via steam. How do I save as uncompressed?

It's on the Preferences screen in-game.

archibalduk wrote: Sat Mar 27, 2021 6:40 pm Are you importing using csv or xlsx? Xlsx is more doable as all speech marks are stripped from csv files when importing (so Anaheim Ducks "C" is actually processed as Anaheim Ducks C).

If you're using csv files then it'll have to be a bit hacky in that we'll just check to see if the club name ends in "<space>a" or "<space>c" (e.g. "Anaheim Ducks C"). Will this cause any potential conflicts with club names? E.g. if you had Altona Maroons Bantam "A" then it would try Altona Maroons Bantam if it couldn't find Altona Maroons Bantam A.

EDIT: I've added the above fall-back function in the event csv is imported. You'll just need to bear in mind the possibility of "Altona Maroons Bantam A" potentially being imported as "Altona Maroons Bantam" if "Altona Maroons Bantam A" does not exist, but this does seem like a very small chance.

I was already using a .xlsx so this shouldn't be an issue.

What is the easiest way to mass delete specific career history entries again? I want to clear out any where Club or Competition is [None] or a specific competition.

xECK29x wrote: Wed Mar 31, 2021 4:42 pm What is the easiest way to mass delete specific career history entries again? I want to clear out any where Club or Competition is [None] or a specific competition.

Set the GP to zero for those entries and then go to People -> Mass Edit -> Delete entries with zero GP.

If easier, I can add an option to delete [None] clubs and comps.

ideawithoutamind wrote: Tue Mar 30, 2021 5:07 am*I can send you some examples at some point, but I've found certain UIDs behave differently in game (navigation doesn't work or is wonky), which can be resolved by creating a new club competition OR re-assigning existing as league. Not sure if this is an editor thing or an issue with 1.4.1 I've experienced same issue on Pivot/TBL.

Yes please. This isn't something I've come across before, aside from prior UID allocation issues which have since been fixed.

archibalduk wrote: Wed Mar 31, 2021 9:20 pm If easier, I can add an option to delete [None] clubs and comps.

I think this would be a welcome addition

xECK29x wrote: Wed Mar 31, 2021 4:42 pm What is the easiest way to mass delete specific career history entries again? I want to clear out any where Club or Competition is [None] or a specific competition.

Other option, export all, mass delete all history, sort by [None], delete, re-import.

archibalduk wrote: Wed Mar 31, 2021 9:31 pm Yes please. This isn't something I've come across before, aside from prior UID allocation issues which have since been fixed.

I'll try to give you examples tomorrow!

ideawithoutamind wrote: Fri Apr 02, 2021 5:36 am archibalduk wrote: ↑Wed Mar 31, 2021 4:31 pm
Yes please. This isn't something I've come across before, aside from prior UID allocation issues which have since been fixed.

I'll try to give you examples tomorrow!

I'm strictly a 1.4.1 user, so not sure if this carries over to 1.5 (worth verifying before doing anything extensive troubeshooting to figure it out)

This is using a modified version of PremierPivot 5.5 (I had stripped out a bunch of the playable league rules, and copied the DEL and Germany setup over to a full Brazilian setup mimicking germany, and added Brazilian players (basically copied and renamed from German players)
Figured xECK29x may want to know this as well. I'll ping him on discord after I post this.
Brazilian Ice Hockey League

Let me know if you have any issues accessing it

This is not unique to creating new leagues, as I fiddled around with this when making GUH and got it working, but wondering if there's some behind the scenes things with UID that comes into play. I've tried using the UID validator in other cases, and it usually doesn't make a difference to this behavior

I included both databases, which should be identical in setup. Both leagues run and can sim without any issues. The issue is with the menu navigation.
Brazil BrokenMenu, Brazilian Ice Hockey League = 1246683
Clicking the top Trophy Icon, Brings you to the Overview screen (most working leagues bring you to standings)
On a team page, clicking the BIHL does nothing (other working leagues bring you to standings page)

Brazilian_NewUID, I renamed an existing extinct league (I kept the name and added ID in long name just for quick reference, but that is just cosmetic)= Brazilian Ice Hockey League (11214 - Alpen League)
I updated the teams to point to the new LeagueID and updated the stages, finance, rules, and transfer rules to point to the existing new ID.

Otherwise everything should be configured exactly the same.

Clicking Trophy Icon brings you to standings
Clicking BIHL from team page brings you to standings

The game and sim works fine, just the weird menu issue.